Zoomlion 6013-6 tower crane
Qingdao11264 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 152 752...
Show
+86 152 7525 5697
China, Qingdao
13,230 lb
Lifting height
131.2 ft
China, Qingdao
26,460 lb
Lifting height
196.9 ft
China, Qingdao
13,230 lb
Lifting height
131.2 ft
China, Ka Shi Di Qu
17,640 lb
Lifting height
131.2 ft
China, Qingdao
131.2 ft
China, Ka Shi Di Qu
131.2 ft
China, Qingdao
22,050 lb
Lifting height
196.9 ft
China, Qingdao
China, Changsha Shi
141.1 ft
China, Ka Shi Di Qu
55,120 lb
Lifting height
265.7 ft
China, Qingdao
China, Hanghzou, Zhejiang
China, Changsha Shi
China, Qingdao
China, Qingdao
China, Hanghzou, Zhejiang
China, Changsha Shi
China, Changsha Shi
213.3 ft
China, Changsha Shi
13,230 lb
Lifting height
131.2 ft
China, Qingdao
Crane Model:6013-6
Free Standing height:40M
Jib Length:60M
Maximum Capacity:6T
Tip Load:1.5T
Mast section type:1.6*1.6*2.8M
fixed anchorage:According to customer needs
Foundation embedded bolts Included / Excluded:According to customer needs
Telescoping Cage Included / Excluded:Included
counterweight block:According to customer needs
foundation pre-embedded bolts mold:According to customer needs
foundation pre-embedded anchorage mold:According to customer needs
Wire Rope:The old one is based on the steel wire rope configured by the original tower crane
Delivery Port:According to customer needs
Модель крана: 6013-6
Высота в свободном положении: 40 м
Длина стрелы: 60 м
Максимальная грузоподъемность: 6 т
Нагрузка на оголовок: 1,5 т
Тип секции мачты: 1,6 х 1,6 х 2,8 м
Фиксированное крепление: в соответствии с потребностями заказчика
Фундаментные анкерные болты включены/не включены: в соответствии с потребностями заказчика
Телескопическая клеть включена/не включена: в комплекте
Блок противовеса: в соответствии с потребностями заказчика
Форма для фундаментных анкерных болтов: в соответствии с потребностями заказчика
Форма для фундаментных анкерных болтов: в соответствии с потребностями заказчика
Трос: старый вариант основан на стальном тросе, сконфигурированном для оригинального башенного крана
Порт доставки: в соответствии с потребностями заказчика
起重机型号: 6013-6
独立高度：40米
吊臂长度：60米
最大容量: 6T
载重上限: 1.5吨
桅杆截面类型：1.6*1.6*2.8米
固定锚点：根据客户需求
基础嵌入式螺栓：包含/不包含：根据客户需求而定。
套叠式笼子包含/不包含：包含
配重块：根据客户需求
基础预埋螺栓模具：根据客户需求定制。
基础预嵌入锚固模具：根据客户需求
钢丝绳：旧型号是基于原始塔式起重机配置的钢丝绳。
交货港口：根据客户需求而定。