New TyreON ASM0703H motorcycle lifting table with front wheel chock
≈ CA$2,189
Akersloot6460 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 537...
Show
+31 6 53701658
+31 72 540...
Show
+31 72 540 1002
Netherlands 
1,543 lb
Netherlands, Akersloot
1,102 lb
Netherlands, Akersloot
1,543 lb
Netherlands, Akersloot
1,543 lb
Netherlands, Akersloot
661.4 lb
Netherlands, Akersloot
5,952 lb
Netherlands, Akersloot
6,614 lb
Netherlands, Akersloot
5,512 lb
Netherlands, Akersloot
6,614 lb
Netherlands, Akersloot
8,818 lb
Netherlands, Akersloot
6,614 lb
Netherlands, Akersloot
8,818 lb
Netherlands, Akersloot
2,205 lb
Netherlands, Akersloot
Capacity 700 kg
Lifting height 16 - 120 cm
Table LxW 222 (250) x 73 cm
Drive 1.5 kW Electric-hydraulic
Up + down 2 buttons on controller
Unlocking By foot
► No air required
► Extendable ramp
► Rear wheel panel W=48 cm
Voltage 230V
Professional electric motorcycle lifting table, suitable for heavy and light motorbikes, motorcycles, mopeds, scooters and mopeds up to 700 kg.
The platform can be extended to 250 cm with the front wheel chock.
A real asset, equipped with many conceivable safety options and known for the extendable ramp.
Motorcycle lifting table - with front wheel chock
Reliable and powerful lifting table - meets the requirements of the latest CE guidelines
The platform is equipped with a ladder chassis
With heavy lifting cylinder, silent in use and is eco-friendly
With many extra safety options and 1 year warranty
Solid constructed and comes with 2 adjustable eyes for hooking and lashing
Finished off by powder coating, functional and scratchproof
Comes with hydraulic oil and is tested before packaging
Easy to use and to install
Pre-drilled with anchoring holes
Fits on every electrical circuit in the fuse box (14 amperes - 230V)
TyreON ASM0703H - Autec ASM0703H motorcycle lifter
The Autec - VLT lifts for motorcycles, quads, go karts, ride - on mowers etc. have been produced by Autec for 15 years and during that time the focus was on quality and performance.
Resulting in four top-quality bike lifts that meet the high standards of professional users. These lifts are now TyreON branded and still have the unique Autec properties.
At driving the front wheel into the chock the smart swivel-down mechanism locks the motorcycle.
The front wheel chock can be mounted at various positions on the table also for motorbikes with a wheelbase of 2.5 meters.
The wheel chock is adjustable for wheels with different diameters.
The hydraulic bike lift is equipped with an extra-large folding and removable rear panel.
The rear wheel panel has a storage compartment for the ramp. The ramp can be manually pushed in or out. In vertical position, the ramp cannot escape the rear panel.
Unlocking is done by foot or hand with a handle at the side of the base.
The stop-plate is attached to the end of the table so the motorbike cannot unexpectedly ride off the table.
TyreON ASM0703H motorcycle lifter, safety and TyreCARE
The scissorlifts are equipped with sophisticated safety features
The thermal protection shuts off the current in case of overload
Check valve in the hydraulic pump
Mechanical safety lock on every 6 cm
Hose rupture protection
An overload valve protects the vehicle lift against damage
Adjustable eyes for hooking lashing straps
The mechanical locking prevents dropping in the event of a hose rupture
An overpressure valve protects the vehicle lift against damage due to excessive oil pressure (overweight motorcycle)
Auto-stop at 120 cm and an aluminum E-motor with cooling fins and fan
TyreCARE - Support and parts are available anytime
Adiitional to the ASM0703H TyreON offers 2 other (Autec) models
Lifting table and the ramp are 1 meter wide
230V electro-hydraulic control unit
No compressed air required
Lift table and the ramps are 1.30 meters wide
230V electro-hydraulic control unit
No compressed air required
TyreON ASM0703H motorcycle lifting table
Technical details
Lifting capacity 700 kg
Drive on height - Lifting height 16 - 120 cm
Platform (L x W) 222,3 x 73,3 L= max. 250 cm with wheel chock cm
Panel (L x W) 53,5 x 48 cm
Length of the ramp 40 cm
Duration lifting / lowering 20 / 10 sec.
Unlocking the safety lock by foot pedal
Lifting and lowering Up + down button on the controller
Type of ramp extendable
Position hydraulic pump-unit under platform
Wheel-clamp front wheel chock
On-floor / In-floor ✓ / ✓
Mechanical safety lock ✓
Auto-stop at 120 cm ✓
Rear wheel panel foldable / removable ✓ / ✓
Non-slip profile on ramp / table ✓ / ✓ (diamond plate for motorcycle stands)
Length of hydraulic hose 250 cm
Additional information
Voltage 230 V / 1 Ph
Electric engine / circuit protection 1,5 kW / 14 Ampère
Required air pressure No air required
Weight of the motorcycle lifting table 275 kg
Package L225 x B75 x H145 cm - 275 kg
Delivery - motorcycle lifting table
The TyreON ASM0703H motorcycle lifter is tested on all features before it is packed with the accessories;
Installation and operating manual
2 adjustable eyelets
TyreON AWC160 motorcycle front wheel chock - tilt mechanism
The foldable + removable panel including the ramp
Controller
Optional
Hydraulic oil is not included (5 liters hv-iso-32 is optional)
TyreON WS1 wheel stopper attached to the end of the table is optional
TyreON ASM0703H - BMW grey
The TyreON ASM0703H motorcycle lifter is also available in BMW grey and comes with the same standard accessories.
ASM0703H motorcycle lifting table with front wheel chock