New Unicraft SSK 3.1 sandblasting machine
Niederlangen6596 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
working heigth 580 mm
air consumption 400 - 800 l/min
working pressure 3,4 - 8,0 bar
suction capacity 17,4 m³/h
total power requirement 1,2 kW
weight of the machine ca. 115 kg
dimensions of the machine ca. 1225 x 935 x 1640 mm
through-put width 580 mm
working heigth 580 mm
air consumption 400 - 800 l/min
working pressure 3,4 - 8,0 bar
suction capacity 17,4 m³/h
total power requirement 1,2 kW
weight of the machine ca. 115 kg
- Suitable for various blasting materials, e.g. quartz, glass ball,
Plastic ball, etc.
- Ideal for cleaning, derusting or removing paint from all metal parts
Type, e.g. engine parts, fittings, signs, housings, rims, hinges
- High-quality latex work gloves are firmly attached to the housing
- Optimal visibility and occupational safety when machining workpieces because
of the
Window with glued protective film
- Dust-free work due to all-round seals on the cover and door frames
- Stable storage grid enables workpieces to be placed in the cabin interior
- With drain opening for changing the blasting material
- Suction pipe for the blasting material attached to the bottom of the
collecting container
- With compressed air connection on the outside
- Glass bead abrasives, corundum abrasives, silicon carbide, plastic
Blasting media, etc. can be used
Equipment details:
- Very large, upward-opening front flap with gas pressure springs for quick
access
and easy loading and unloading
- Integrated suction system with exchangeable air filter
- Jet gun without finger trigger - Air flow is controlled via
Foot pedal
- Four fluorescent tubes (230 volts), in a separate housing with protective
screen and
exchangeable protective film, including five replacement films
- 2 separate switches for suction and cabin lighting
- Regulation of the working pressure via pressure regulator with manometer
- Cross struts on the feet allow easy transport with the pallet truck
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Durchlaufhöhe 580 mm
Luftbedarf 400 - 800 l/min
Arbeitsdruck 3,4 - 8,0 bar
Absaugleistung 17,4 m³/h
Gesamtleistungsbedarf 1,2 kW
Maschinengewicht ca. 115 kg
Raumbedarf ca. 1225 x 935 x 1640 mm
Durchlaufbreite 580 mm
Durchlaufhöhe 580 mm
Luftbedarf 400 - 800 l/min
Arbeitsdruck 3,4 - 8,0 bar
Absaugleistung 17,4 m³/h
Gesamtleistungsbedarf 1,2 kW
Maschinengewicht ca. 115 kg
Beschreibung
- Geeignet für verschiedene Strahlgüter, z.B. Quarz, Glaskugel,
Kunststoffkugel,u.a.
- Ideal zum Reinigen, Entrosten oder zur Lackentfernung von Metallteile aller
Art, z.B. Motorenteile, Beschläge, Schilder, Gehäuse, Felgen, Scharniere
- Hochwertige Arbeitshandschuhe aus Latex sind fest mit dem Gehäuse verbunden
- Optimale Sicht und Arbeitsschutz bei der Werkstückbearbeitung wegen der
Sichtscheibe mit aufgeklebter Schutzfolie
- Staubfreies Arbeiten aufgrund umlaufenden Dichtungen an Deckel- und Türrahmen
- Stabiles Ablagegitter ermöglicht Auflegen von Werkstücken imKabineninnenraum
- Mit Ablassöffnung zum Wechseln des Strahlgutes
- Ansaugrohr für das Strahlgut am Boden des Auffangbehälters befestigt
- Mit Druckluft-Anschluss an der Aussenseite
- Glasperlen-Strahlmittel, Korund-Strahlmittel, Siliziumkarbid, Kunststoff-
Strahlmittel, usw. einsetzbar
Ausstattungsdetails:
- Sehr grosse, nach oben öffnende Frontklappe mit Gasdruckfedern zum schnellen
undeinfachen Be- und Entladen
- Integrierte Absauganlage mit auswechselbarem Luftfilter
- Strahlpistole ohne Fingerabzug – Steuerung des Luftstroms erfolgt über
Fusspedal
- Zwei Leuchtstoffröhren (230 Volt), in separatem Gehäuse mit Schutzscheibe und
auswechselbarer Schutzfolie, inklusive Fünf Ersatzfolien
- Lichtschalter mit Doppelfunktion: Absaugung und Kabinenbeleuchtung werden
gleichzeitig ein- und ausgeschaltet
- Regulierung des Arbeitsdrucks über Druckregler mit Manometer
Lieferumfang:
- Hochwertige Strahlpistole mit Keramikdüse
- 4 Keramikdüsen (6/6/7/7 mm)
- 5 Ersatzfolien für Sichtfenster