Studer S20 Favorit cylindrical grinding machine
SAINT-GENIX-LES-VILLAGES
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+33 4 86 11...
Show
+33 4 86 11 77 77
France 
Germany, Bühl-Weitenung
France, Saint-Chamond
Netherlands, Schijndel
France, Bellignat
France, Saint-Chamond
Belgium, Bélgica
Germany, Location:heidelberg
Germany, Location:frankfurt
Switzerland, Brugg
Switzerland, Brugg
Switzerland, Brugg
Switzerland, Brugg
Switzerland, Brugg
TECHNICAL CHARACTERISTICS:
Year of manufacturing: 1997
Centre distance: 400 [mm]
Height of centers: 100 [mm]
Stroke Z axis: 420 [mm]
Working feed Z axis: 100 - 3500 [mm/min]
Orientation of table: 0 - 30 [°]
Grinding spindle motor power: 3 [kW]
Max. diameter grinding wheel: 350 [mm]
Max. grinding wheel width: 30 [mm]
Grinding wheel bore: 127 [mm]
Workpiece spindle nose: W20
Workpiece spindle min. speed: 30 [rpm]
Workpiece spindle max. speed: 1200 [rpm]
Max. part weight in part holder headstock between centres: 20 [Kg]
Workpiece swiveling range: 0 [°] / +90 [°]
Workpiece spindle power: 0.5 [kW]
Type of attachment tailstock: MT2
Tailstock quill stroke: 20 [mm]
Supply voltage: 400 [V]
Total power required: 8 [kVA]
Machine dimensions: 2350 x 1480 [mm]
Weight: 1600 [Kg]
INCLUDED EQUIPMENT:
1 paper tape filtration device
1 SONY LH 31A 2 axis digital read out
1 WALDMANN LED lamp
1 internal grinding spindle type: 82060B / Speeds: 11,900 up to 28,400 [rpm]
1 SENSITRON contact indicator
1 grinding wheel balancing device
1 grinding wheel balancing arbor
1 three-jaw chuck FN Ø100 [mm] MT3
1 magnetic chuck Ø160 [mm] MT3
1 table-mounted wheel dresser
37 W20 collets
2 half-centres
2 full centres
1 blunt centre
1 pulley Ø105 [mm] for internal grinding spindle
2 external grinding wheel flanges
1 TYROLIT 494271 grinding wheel for external grinding operations
Various PCD internal grinding wheels
4 driving carriers
Various miscellaneous
Machine visible under power in our premises by appointment.
Price on request, loading on truck included.
Possibility of shipping Worldwide.
The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.
Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to consider. Surface grinder, lathe, machining center, milling machine
CARACTÉRISTIQUES TECHNIQUES :
Distance entre-pointes : 400 [mm]
Hauteur de pointes : 100 [mm]
Course axe Z : 420 [mm]
Vitesse avances de travail axe Z : 100 - 3500 [mm/min]
Orientation table : 0 - 30 [°]
Diamètre maxi. Meule : 350 [mm]
Largeur maxi. Meule : 30 [mm]
Alésage meule : 127 [mm]
Nez de broche porte-pièce : W20
Vitesse mini. broche porte-pièce : 30 [tr/min]
Vitesse maxi. broche porte-pièce : 1200 [tr/min]
Poids maxi. admissible poupée porte-pièce : 20 [Kg]
Angle de rotation poupée porte-pièce : 0 [°] / +90 [°]
Cône contre-poupée : MT2
Course fourreau contre-poupée : 20 [mm]
Tension d'alimentation : 400 [V]
Puissance installée : 8 [kVA]
Dimensions machine : 2350 x 1480 [mm]
Poids : 1600 [Kg]
ÉQUIPEMENTS INCLUS :
x1 bac à filtration papier
x1 visualisation de cotes 2 axes SONY type LH 31A
x1 lampe LED WALDMANN
x1 broche à rectifier les intérieurs Type: 82060B /Vitesses: 11900 à 28400 [tours/min]
x1 détecteur de contact SENSITRON
x1 banc d'équilibrage de meules
x1 arbre d'équilibrage de meules
x1 mandrin 3 mors FN Ø100 [mm] CM3
x1 plateau magnétique Ø160 [mm] CM3
x1 diamanteur sur table
x37 pinces de serrage W20
x2 demi-pointes
x2 pointes pleines
x1 pointe tronquée
x1 poulie Ø105 [mm] pour broche à rectifier les intérieurs
x2 flasques porte-meule exterieur
x1 meule TYROLIT 494271 pour travaux de rectification exterieur
Diverses meules intérieur PCD
x4 tocs d'entrainement
Divers outillages
Machine visible sous tension pour essais en nos locaux, sur RDV.
Prix HT sur demande, chargement sur camion inclus.
Possibilité d’expédition dans toute la France ainsi qu’à l'international.
Plus de photos et détails sur demande.
Descriptif technique à titre indicatif, sans engagement de notre part.
Machine similaire aux marques okamoto , elb , ger , tacchella , karstens , jones shipman , jung , favretto , blohm rectif intérieure extérieure (inter/exter) à voir également rectifieuse plane , tour , centre d'usinage , fraiseuse