Putzmeister Sewage sludge conveying system other conveyor

Preis: Contact us for price
Putzmeister sewage sludge conveyor system with a maximum delivery rate of 6-7 t per hour and a pressure of 100bar (including pumping)
Is no longer in the pit in the pictures
has been
cleaned and stored
Fully functional and hardly used
Design data (organic)
Medium
Conveying medium: Sewage sludge
Material definition (Fluid I / Fluid II) (*1): Fluid 2
Dry matter content: 25 to 30%
Type of dewatering: Centrifuge
Precipitant (*4): Polymer
Maximum particle size: 5 mm
Type / size of foreign bodies (*6): Wood
glass
stones / 80 x 80 x 80 mm
Flowability: Like moist soil
Temperature of the medium: +5 to +20 °C
Density of the medium: 0.9 to 1.1 t/m³
pH value: 6 to 8
Gas formation: None
Loss on ignition (*5): < 40%
Rheological behaviour: Thixotropic
Aggressive: No
Abrasive: Yes
Corrosive: No
Sticky: Yes
Further data
Installation location: Outside
Ambient temperature: -5 to +35 °C
Installation altitude: < 1,000 m.a.s.l
Operating time: 24 h/d
Explosion protection (*2): None
Zone classification (*3): No zones defined
Notes
*1 Material definition according to the Pressure Equipment Directive 2014/68/EC
*2 In accordance with Directive 2014/34/EC of the European Parliament and of the Council of 21 April 2016
on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for
intended use in potentially explosive atmospheres
*3
*4 When conditioning with FeCI3 or lime
a higher pressure loss must be expected
*5 For sewage sludge
the organic content should be < 50%
*6 Frequency of foreign bodies: max. 1% [vol. %] of the material flow
Functional description and design features
PSP silos are complete systems for picking up
storing and discharging conveyed goods. They essentially consist of
of the silo body with supporting structure
a special silo floor with discharge system
(sliding frame and discharge and pre-pressing screw for feeding a thick matter pump). Depending on the
Depending on the customised system
assemblies such as an assembly platform
insulation/heating or instrumentation are added
Design
Angular design
Capacity: 42 m³ (geometric) / Please note: The net capacity depends on the
Bulk cone / dry matter content
Silo dimensions: 5500 mm x 3500 mm x 2200 mm (WxLxH) with upstand
Height to silo floor: approx. 1040 mm (substructure height)
Total silo height: approx. 3240 mm
including substructure
Rated pressure: Unpressurised
Material
Floor: S355JR G3 (due to increased wear)
Sliding frame: S355JR G3
Other: S235JR G2
Note: An on-site ‘pit’ with a depth of X m is required for the silo
calculated from ground level lorry access
Equipment
Silo prefabricated for bolting / welding at the place of use
Silo body made of sheet steel in welded
site-fabricated or workshop-prefabricated design
Silo floor as flat floor in welded design
stiffened with profiles
with additional welded-in flange for mounting the bolted discharge auger
with hold-down brackets for mounting the Putzmeister discharge system (sliding frame)
With eyelets for attaching mounting aids for the discharge auger
The supporting structure of the silo is designed for good accessibility of the area under the silo
Connections / openings
Silo lid
1 nozzle for fill level measurement
2 nozzles for aeration and ventilation
1 nozzle for CH4 monitoring
Silo
1 nozzle DN 50 flange for waste water from pit sump
1 DN 800 manhole near the flat floor
with screw cap and hinge
The execution is carried out in accordance with an execution description drawn up by PSP
which will be confirmed by the
confirmed by the client within 10 days
without legal obligation on the part of the client
Additional equipment
Splash guard
Anchor boxes
Maintenance platform
Sliding frame PDSL5535
1.00 Sliding frame PDS L 5535
Functional description and design features
A sliding frame made of a bevelled special profile is moved back and forth over the flat silo floor by a hydraulic cylinder
back and forth over the flat silo floor. During the forward movement
the inclined profile edge underruns the material
which is conveyed to the discharge screw
is conveyed to the discharge auger by the driving edge. The sliding frame supports the even and complete
complete sludge discharge into the silo discharge screw and prevents bridging of the medium. Due to the
The even lowering of the silo contents ensures that the sludge is discharged as in a mass flow (first in
first out)
and segregation is prevented
The necessary projection for the drive is approx. 2.80 metres
The lifting speed of the discharge sliding frame can be infinitely adjusted manually to optimise the operating behaviour
operating behaviour. A stuffing box seal and (optional) automatic centralised grease lubrication ensure that the system is sealed against the conveyed material
of the system against the conveyed material
The PDSL series is price-optimised
Installation in rectangular or square steel silo with flat base
Silo dimensions (lxw): 5,500 x 3,500 mm
Cylinder stroke: 800 mm
Weight of the frame: 1.2 tonnes
The silo discharge system consists of
Discharge sliding frame made of special profile S 355
in two or three sections depending on size for transport and easy assembly
with bolted connection
Double-acting hydraulic cylinder
short design
with coupling rod (multiple chrome-plated)
clamping coupling
clamping flange and driver
Spherical cap for aligning the hydraulic cylinder during assembly
Special seals and guide bands as well as contact protection for coupling rod
Two non-contact limit switches on the hydraulic cylinder for stroke reversal
Blockage monitoring
Automatic centralised grease lubrication via the thick matter pump lubrication system
Electrical and hydraulic controls
Safety devices
The proper functioning of the discharge sliding frame is monitored by non-contact limit switches and control of the lifting time
and control of the lifting time. If the set lifting time is exceeded
the lift reverses automatically and a fault signal is issued
(without interrupting operation)
The hydraulic circuit is pressure-monitored. In the event of a blockage of the discharge sliding frame
the stroke is reversed automatically
stroke reversal takes place automatically
When planning
please consider the space required for the hydraulic cylinder outside the silo as well as a free space for removal
for removal
1.00 Sales accessories PDSL Auto.grease.central.lubrication. w. stopper. Additional component
Surcharge for extending the centralised grease lubrication system of the slurry pump with lubrication circuits for
PDSL sliding frame
Incl. proportional pipework
bulkhead strip and small parts
Discharge screw SHS 3232 SH
1.00 SHS Series / Type SHS 3232 SH
The SHS silo discharge screw is designed to convey highly viscous materials from a silo with a positive inlet pressure into the downstream piston pump
positive inlet pressure into the downstream piston pump. This ensures an optimum filling level of the piston pump
is ensured
Drive type: hydraulic
Max. discharge capacity: 40 m³/h
Speed: max. 25 rpm
Torque: max. 2 x 3,500 Nm
Inlet flange: 3,200 x 580 mm
Outlet flange: 720 x 720 mm
Screw diameter: 315 mm
Screw pitch: 250 mm
Empty weight: approx. 3,200 kg
1.00 Sales accessories SHS pressure sensor -1- +4 bar NEX
1.00 Sales accessories SHS Auto.grease central lubrication w. stopper indicator Additional component
Surcharge for the extension of the grease central lubrication of the thick matter pump by lubrication circuits for
Discharge system SHS
Incl. proportional pipework
bulkhead strip and small parts
Sludge pump KOS 1040 HP
1.00 KOS 1040 HP
Putzmeister KOS high density solids pumps with S-pipe are the first choice for transporting slurries and high viscosity
high dry matter content and high viscosity
Machine type: KOS 1040 HP
Max. Delivery rate: 4 m³/h (at 80 % filling level)
Max. Max. delivery pressure: 100 bar
Diameter of the delivery cylinder: 150 mm
Stroke length: 1,000 mm
Pressure connection for connecting the delivery line: ZX 125
Wear parts: DURO 22
Dimensions (LxWxH): 4,100 x 1,200 x 1,100 mm
Dimensions without options
Weight approx.: 2,500 kg
Additional information
Incl. electrical grease central lubrication
Wear protection of the delivery cylinders: Hard chrome-plated
coating thickness: 250μm
1.00 Flow rate theo.max. delivery rate: 5 m³/h @ 100% filling level
1.00 Delivery pressure eff.max. delivery pressure: 100 bar (max.)
1.00 Piston seal Material of delivery piston: NBR
1.00 Centralised grease lubrication Lubrication: Electric centralised grease lubrication
1.00 Sales accessories Pumps Oil pan for 1040 pump
Dimensions without optionsThe pump frame is equipped with a removable oil pan. This prevents any hydraulic oil
This prevents hydraulic oil from spilling onto the floor and ensures a clean and safe working environment
Material: galvanised steel
with handles for removing the tray
Incl. connection for a drain ball valve for targeted draining of impurities
1.00 Sales accessories Pumps Height adjustment for pump 1040
Weight approx.: 2,500 kg
Additional information
Incl. electrical grease central lubrication
Wear protection of the delivery cylinders: Hard chrome-plated
coating thickness: 250μm
1.00 Flow rate theo.max. delivery rate: 5 m³/h @ 100% filling level
1.00 Delivery pressure eff.max. delivery pressure: 100 bar (max.)
1.00 Piston seal Material of delivery piston: NBR
1.00 Centralised grease lubrication Lubrication: Electric centralised grease lubrication
1.00 Sales accessories Pumps Oil pan for 1040 pump
Up to 8 bearing blocks are welded or bolted to the pump frame. A stainless steel
foundation
a stainless steel height adjustment is screwed in
The advantages of this solution are
Unevenness in the foundation can be easily levelled out
Simplified installation with several components on top of each other
The Putzmeister height adjustment allows height adjustment from -12 to + 11 mm
1.00 Sales accessories Pumps Foundation anchor M20 with adhesive cartridge (HA + pump)
1.00 Sales accessories KOS pump funnel GS-LCB KOS 1040 Surcharge
1.00 Colour Colour: MB 1227 (chrome yellow)
1.00 Locking gate valve version Locking gate 720x720x120 manually operated
w. limit switch NEX PD
A gate valve can be used to shut off parts of a system for a variety of reasons. The
gate valve is installed either under a silo
bunker etc. in the inlet of the Putzmeister pump
This is advantageous for carrying out any maintenance work in the pump hopper when the silo is full
The valve blade is opened or closed manually
The open/closed status is monitored by proximity switches
Technical data
720 x 720 120
Incl. limit switch
1.00 KOS Pump type: KOS 1040
1.00 Delivery cylinder length: 1,000 mm
Hydraulic unit HA 75 CI
1.00 HA 75 CI
Hydraulic unit for continuous operation and the following design data
Oil tank volume: 600 litres
Voltage: 400 V / 50 Hz
Engine speed: 1,480 rpm
Dimensions: (LxWxH): 2,700 x 1,400 x 1,700 mm
Dimensions without options
1.00 Cooler HA-CI Cooler version: Oil-air cooler (with electric motor)
1.00 Hydraulic unit colour Colour: MB 1227 (chrome yellow)
standard
1.00 Hydraulic oil Hydraulic oil: HLP 46 (standard)
Switch cabinet SEP 75
1.00 SEP 75
The switch cabinet contains the power and control section of the PSP scope of delivery. It complies with the current
current ISO
DIN
VDE and UVV regulations
General information
Dimensions: 1,200 x 2,000 x 500 mm (incl. base plate)
Protection class: IP 55
Design: 2 (common mounting plate
cable entry into the switch cabinet from below)
Material: painted steel (if stainless steel version is not ordered as a separate option)
Colour: RAL 7035 (light grey)
Equipment (power section)
Power supply with main switch
Motor protection
Motor temperature protection (PTC relay)
Automatic circuit breakers
Equipment (control section)
PLC: Siemens S7 (unless otherwise described)
HMI: 15 touch operating panel (Putzmeister OP151)
Communication to the control room via
Potential-free contacts / Ethernet
Key switch (local-0-remote)
Fault light
Emergency stop button with safety relay (PNOZ) and associated button (blue) for acknowledgement
1.00 Control cabinet version Stand-alone control cabinet version
1.00 Control cabinet design Cable entry: From below
1.00 Electrical control system PLC control system Siemens S7-300
1.00 Electrical control system Signal exchange: Pot. free contacts
Find more here
show contacts
Contact us at
show contacts