Topcon Opus A6 load moment indicator for construction equipment
İSTANBUL8725 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+90 532 311...
Show
+90 532 311 23 98
+90 532 311...
Show
+90 532 311 23 98
Turkey 
Turkey
Turkey, Tokat
Netherlands, Wouw
Spain, Uxes
Spain, Camarena
Ukraine, Kolomiya
Spain, Uxes
Spain, Uxes
Basit Moment Kontrol Sistemi Ekranı
HOUSING
Orientation landscape or portrait
W267 x H144 x D69,5 mm
excl. connector and cables
MEMORY
512 MB DDR2 RAM
4 GB NAND flash
POWER SUPPLY
9 ... 36 V DC
PROGRAMMING ENVIRONMENT
OPUS Projektor
Codesys-Tools (3.5)
ISO-VT
C/C++
DISPLAY
7", 15:9 TFT transmissive
800 x 480 px, 500 cd/m²
Contrast ratio 600:1"
USER INTERFACE
12 softkeys
4 hardkeys
Encoder
Touchscreen
OPERATING SYSTEM
Linux Kernel 3.0.0 or higher
SUPPORTED PROTOCOLS
CANopen®
CANfreestyle
J1939
SIGNALS
Light sensor
Multicolor-LED
3 status-LED’s
Speaker, approx. 80 dB(A)
INTERFACES
2 x CANbus ISO 11898
CAN specification 2.0 B active
Ethernet 10/100 Mbit/s Base T
1x RS232 (only RxD, TxD, GND)
Analog/Digital I/O:
4 analog/digital inputs,
3 digital outputs
1 USB 2.0 high speed on main connector
1 USB 2.0 high speed on front
REAL TIME CLOCK
Buffered by gold cap
CERTIFICATES
CE mark
E1 Type approval
PROCESSOR
32-bit, 800 MHz
Freescale® I.MX6™
VIDEO
Inputs: 3x analog
Vss: 1 V
Camera supply: 12 VDC
Max. current: 500 mA
Output: 1x camera control output, Ampacity: 300 mA
ENVIRONMENTAL CONDITIONS
Temperatures:
operating -30° to +65°C
storage -40° to +85°C
Protection: IP 65 and IP 66
Mechanical Shock: Level 2
Random Vibration: Level 2
Sinusoidal Vibration: Level 2
CONNECTORS
Main: AMP Seal, 26 pin
Video: M12 round, 5 pole, B-coded
Ethernet: M12 round, 4 pole, D-coded