Emco CONCEPT MILL55 metal milling machine for sale by auction
≈ CA$12,820
Weilheim Teck
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
$8,265
€7,000
≈ CA$11,360
50 Hz
Germany, Linden
$23,500
€19,900
≈ CA$32,300
60 Hz
Germany, Boxberg
$1,653
€1,400
≈ CA$2,273
Germany, Weilheim Teck
$1,417
€1,200
≈ CA$1,948
Germany, Villingen-Schwenningen
$885.50
€750
≈ CA$1,217
Germany, Schöneck
$1,169
€990
≈ CA$1,607
50 Hz
Germany, Schöneck
$1,417
€1,200
≈ CA$1,948
50 Hz
Germany, Schöneck
$14,760
€12,500
≈ CA$20,290
Germany, Chemnitz
$590.40
€500
≈ CA$811.60
Germany, Haiger
$295.20
€250
≈ CA$405.80
Germany, Herzberg Am Harz
$2,952
€2,500
≈ CA$4,058
Germany, Herzberg Am Harz
$590.40
€500
≈ CA$811.60
Germany, Herzberg Am Harz
$53,130
€45,000
≈ CA$73,050
Germany, Chemnitz
$17,710
€15,000
≈ CA$24,350
Germany, Chemnitz
$4,132
€3,500
≈ CA$5,682
Germany, Huisheim
$295.20
€250
≈ CA$405.80
Germany, Herzberg Am Harz
$1,122
€950
≈ CA$1,542
50 Hz
Germany, Schöneck
$4,132
€3,500
≈ CA$5,682
Germany, Huisheim
$425.10
€360
≈ CA$584.40
Germany, Monheim
$737.90
€625
≈ CA$1,015
Germany, Haiger
Frequency: 50 – 60 Hz
Rated current: 2.8 A
Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)
Tool holder: probably SK 30
Max. tool clamping length: 35 mm
Table dimensions: 420 x 120 mm
With 2 grooves and a special EMCO vice
Jaw width: 60 mm
Travel:
X: approx. 300 mm
Y: approx. 300 mm
Z: approx. 200 mm
Incl. matching mobile workbench with various matching contents
Incl. 7-fold tool changer, collets and various matching tool holders
Frequenz: 50 – 60 Hz
Nennstrom: 2,8 A
Steuerung: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)
Werkzeugaufnahme: vermutlich SK 30
Max. Werkzeugaufspannlänge: 35 mm
Tischabmessungen: 420 x 120 mm
Mit 2 Nuten sowie einem speziellen EMCO Schraubstock
Backenbreite: 60 mm
Verfahrwege:
X: ca. 300 mm
Y: ca. 300 mm
Z: ca. 200 mm
Inkl. passender mobiler Werkbank mit diversem passenden Inhalt
Inkl. 7-fachem Werkzeugwechsler, Spannzangen und diversen passenden Werkzeugaufnahmen
Betriebsspannung: 230 V
Frequenz: 50 – 60 Hz
Nennstrom: 2,8 A
Steuerung: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)
Werkzeugaufnahme: vermutlich SK 30
Max. Werkzeugaufspannlänge: 35 mm
Tischabmessungen: 420 x 120 mm
Backenbreite: 60 mm
X: ca. 300 mm
Y: ca. 300 mm
Z: ca. 200 mm
Länge: 2000
Höhe: 1800
Breite: 950
Mit 2 Nuten sowie einem speziellen EMCO Schraubstock
Verfahrwege
Inkl. passender mobiler Werkbank mit diversem passenden Inhalt
Inkl. 7-fachem Werkzeugwechsler
Spannzangen und diversen passenden Werkzeugaufnahmen
Fréquence : 50 – 60 Hz
Courant nominal : 2,8 A
Commande : EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)
Porte-outil : probablement SK 30
Longueur max. de serrage de l’outil : 35 mm
Dimensions de la table : 420 x 120 mm
Avec 2 rainures et un étau
spécial EMCO
Largeur de la mâchoire : 60 mm
Voyager:
X : environ 300 mm
Y : environ 300 mm
Z : environ 200 mm
Avec établi mobile assorti avec différents contenus
assortis
Incl. changeur d’outils 7 fois, pinces de serrage et divers porte-outils assortis
Frequenza: 50 – 60 Hz
Corrente nominale: 2,8 A
Controllo: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)
Portautensili: probabilmente SK 30
Lunghezza massima di serraggio dell'utensile: 35 mm
Dimensioni del tavolo: 420 x 120 mm
Con 2 scanalature e una speciale morsa
EMCO
Larghezza delle ganasce: 60 mm
Viaggio:
X: circa 300 mm
Y: circa 300 mm
Z: circa 200 mm
Incl. banco da lavoro mobile abbinato con vari contenuti
corrispondenti
Incl. cambio utensile a 7 posti, pinze e vari portautensili abbinati
Frequentie: 50 – 60 Hz
Nominale stroom: 2,8 A
Besturing: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840)
Gereedschapshouder: waarschijnlijk SK 30
Max. klemlengte gereedschap: 35 mm
Afmetingen tafel: 420 x 120 mm
Met 2 groeven en een speciale EMCO bankschroef
Breedte bek: 60 mm
Reizen:
X: ca. 300 mm
Y: ca. 300 mm
Z: ca. 200 mm
Incl. bijpassende verrijdbare werkbank met diverse bijpassende inhoud
Incl. 7-voudige gereedschapswisselaar, spantangen en diverse bijpassende gereedschapshouders