Verified seller 
TBT ML 300-4-1450 drilling machine for sale by auction
≈ $6,443
Bad Emstal
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
US$4,072
€3,500
≈ $5,638
Germany, Bad Emstal
US$2,210
€1,900
≈ $3,061
Germany, Euskirchen
US$8,027
€6,900
≈ $11,110
Germany, Euskirchen
US$290.90
€250
≈ $402.70
Germany, Albershausen
US$872.60
€750
≈ $1,208
Germany, Euskirchen
Drilling method: Lip drilling (ELB)
Number of Spindles: 4
Spindle spacing: 120 mm
Center height above floor: 1,150 mm
Drill carriage stroke: 1,450 mm
Drilling depth approx.: 700 mm
Drilling range (in steel St60): Ø 4 – 30 mm (max. Ø 35 mm)
Operating hours: 43.220h
Electrical data:
Operating voltage: 400 V AC
Frequency: 50 Hz
Total connected load: 50 kW
Rated current: 100 A
Main fuse: 125 A
Control: Siemens S7-300 with OP177
control panel
Processing unit:
Main spindle drive: Siemens 1PH7107-7QF02-0BKO – 9.0 kW – 1,500–9,000 rpm⁻¹
Spindle Ratio: 17K28/76 and 17K55/112
Spindle speed: 1,000–6,100 min⁻¹
Feed drive (Z-axis): Schneeberger / Siemens ball screw 40×10×1740 mm
Feed speed: 10–15,000 mm/min
Rapid traverse: 15 000 mm/min
Drive motor: Siemens 1FK7086-7AF71-1FH5 – 28 Nm – 3 000 rpm⁻¹
Workpiece clamping:
Tailstock drive: SEW RF47DV132S2 – 5.5 kW – 250 min⁻¹
Timing belt pulleys: 60 T10/35 and 97 T10/35
Pressure sleeve: Spieth DSM 30.1
Proximity switch: Balluff BES516-325-E5-Y-S4
Coolant and chip system:
Coolant system: HSD 400, pure oil 700 l / dirty oil 1 000 l
High Pressure Pump: Moog Radial Piston Pump – 7.5 kW – 2–194 l/min – 33 bar
Chip conveyor: Astos magnetic belt – 0.25 kW – 1 375 min⁻¹ – 450 mm usable width – approx. 75 kg/h
Additional units:
Chip centrifuge: Mayfran VBU 1000 – 1.5 kW – 500 l/min
Gravity filter: Resy 803/710 – 30 μm – 350 l/min
Submersible pump: Schmalenberger Z40-13/2-2.2 – 2.2 kW – 500 l/min
Air cooler: Sesino AP830-EB – 108,000 kJ/h – 0.9 kW
Hydraulic power unit: Mevesta – 0.37 kW – 7 l/min – 65 bar
Pneumatic unit: Bosch – 5–8 bar – filter fineness 40 μm
Bohrverfahren: Einlippenbohren (ELB)
Spindelanzahl: 4
Spindelabstand: 120 mm
Spitzenhöhe über Flur: 1.150 mm
Bohrschlittenhub: 1.450 mm
Bohrtiefe ca.: 700 mm
Bohrbereich (in Stahl St60): Ø 4 – 30 mm (max. Ø 35 mm)
Betriebsstunden: 43.220h
Elektrische Daten:
Betriebsspannung: 400 V AC
Frequenz: 50 Hz
Gesamtanschlusswert: 50 kW
Nennstrom: 100 A
Hauptsicherung: 125 A
Steuerung: Siemens S7-300 mit Bedienpanel OP177
Bearbeitungseinheit:
Hauptspindelantrieb: Siemens 1PH7107-7QF02-0BKO – 9,0 kW – 1.500–9 000 min⁻¹
Spindelübersetzung: 17K28/76 und 17K55/112
Spindeldrehzahl: 1.000–6.100 min⁻¹
Vorschubantrieb (Z-Achse): Schneeberger / Siemens Kugelgewindetrieb 40×10×1740 mm
Vorschubgeschwindigkeit: 10–15.000 mm/min
Eilgänge: 15 000 mm/min
Antriebsmotor: Siemens 1FK7086-7AF71-1FH5 – 28 Nm – 3 000 min⁻¹
Werkstückspannung:
Reitstockantrieb: SEW RF47DV132S2 – 5,5 kW – 250 min⁻¹
Zahnriemenscheiben: 60 T10/35 und 97 T10/35
Druckhülse: Spieth DSM 30.1
Näherungsschalter: Balluff BES516-325-E5-Y-S4
Kühlmittel- und Spänesystem:
Kühlmittelanlage: HSD 400, Reinöl 700 l / Schmutzöl 1 000 l
Hochdruckpumpe: Moog Radialkolbenpumpe – 7,5 kW – 2–194 l/min – 33 bar
Späneförderer: Astos Magnetband – 0,25 kW – 1 375 min⁻¹ – 450 mm Nutzbreite – ca. 75 kg/h
Zusatzaggregate:
Spänezentrifuge: Mayfran VBU 1000 – 1,5 kW – 500 l/min
Schwerkraftfilter: Resy 803/710 – 30 µm – 350 l/min
Tauchpumpe: Schmalenberger Z40-13/2-2,2 – 2,2 kW – 500 l/min
Luftkühler: Sesino AP830-EB – 108.000 kJ/h – 0,9 kW
Hydraulikaggregat: Mewesta – 0,37 kW – 7 l/min – 65 bar
Pneumatikaggregat: Bosch – 5–8 bar – Filterfeinheit 40 µm
Bohrverfahren: Einlippenbohren (ELB)
Spindelanzahl: 4
Spindelabstand: 120 mm
Spitzenhöhe über Flur: 1.150 mm
Bohrschlittenhub: 1.450 mm
Bohrtiefe ca: 700 mm
Bohrbereich (in Stahl St60): Ø 4 – 30 mm (max. Ø 35 mm)
Betriebsspannung: 400 V AC
Frequenz: 50 Hz
Gesamtanschlusswert: 50 kW
Nennstrom: 100 A
Hauptsicherung: 125 A
Steuerung: Siemens S7-300 mit Bedienpanel OP177
Hauptspindelantrieb: Siemens 1PH7107-7QF02-0BKO – 9,0 kW – 1.500–9 000 min⁻¹
Spindelübersetzung: 17K28/76 und 17K55/112
Spindeldrehzahl: 1.000–6.100 min⁻¹
Vorschubantrieb (Z-Achse): Schneeberger / Siemens Kugelgewindetrieb 40×10×1740 mm
Vorschubgeschwindigkeit: 10–15.000 mm/min
Eilgänge: 15 000 mm/min
Antriebsmotor: Siemens 1FK7086-7AF71-1FH5 – 28 Nm – 3 000 min⁻¹
Reitstockantrieb: SEW RF47DV132S2 – 5,5 kW – 250 min⁻¹
Zahnriemenscheiben: 60 T10/35 und 97 T10/35
Druckhülse: Spieth DSM 30.1
Näherungsschalter: Balluff BES516-325-E5-Y-S4
Kühlmittelanlage: HSD 400, Reinöl 700 l / Schmutzöl 1 000 l
Hochdruckpumpe: Moog Radialkolbenpumpe – 7,5 kW – 2–194 l/min – 33 bar
Späneförderer: Astos Magnetband – 0,25 kW – 1 375 min⁻¹ – 450 mm Nutzbreite – ca. 75 kg/h
Spänezentrifuge: Mayfran VBU 1000 – 1,5 kW – 500 l/min
Schwerkraftfilter: Resy 803/710 – 30 µm – 350 l/min
Tauchpumpe: Schmalenberger Z40-13/2-2,2 – 2,2 kW – 500 l/min
Luftkühler: Sesino AP830-EB – 108.000 kJ/h – 0,9 kW
Hydraulikaggregat: Mewesta – 0,37 kW – 7 l/min – 65 bar
Pneumatikaggregat: Bosch – 5–8 bar – Filterfeinheit 40 µm
Länge: 7200
Höhe: 2700
Breite: 2800
Technische Daten laut Datenblatt
Elektrische Daten
Bearbeitungseinheit
Werkstückspannung
Kühlmittel- und Spänesystem
Zusatzaggregate
Méthode de perçage : Perçage à la lèvre (ELB)
Nombre de broches : 4
Espacement des broches : 120 mm
Hauteur centrale au-dessus du sol : 1 150 mm
Course du chariot de forage : 1 450 mm
Profondeur de perçage env. : 700 mm
Plage de perçage (en acier St60) : Ø 4 – 30 mm (max. Ø 35 mm)
Heures de fonctionnement : 43.220h
Données électriques :
Tension de fonctionnement : 400 V AC
Fréquence : 50 Hz
Puissance totale connectée : 50 kW
Courant nominal : 100 A
Fusible principal : 125 A
Commande : Siemens S7-300 avec panneau de commande OP177
Unité de traitement :
Entraînement de la broche principale : Siemens 1PH7107-7QF02-0BKO – 9,0 kW – 1 500–9 000 tr/min⁻¹
Rapport de broche : 17K28/76 et 17K55/112
Vitesse de la broche : 1 000–6 100 min⁻¹
Entraînement d’alimentation (axe Z) : Schneeberger / Vis à billes Siemens 40×10×1740 mm
Vitesse d’avance : 10 à 15 000 mm/min
Déplacement rapide : 15 000 mm/min
Moteur d’entraînement : Siemens 1FK7086-7AF71-1FH5 – 28 Nm – 3 000 tr/min⁻¹
Serrage de la pièce :
Entraînement de la poupée mobile : SEW RF47DV132S2 – 5,5 kW – 250 min⁻¹
Poulies de courroie dentée : 60 T10/35 et 97 T10/35
Manchon de pression : Spieth DSM 30.1
Détecteur de proximité : Balluff BES516-325-E5-Y-S4
Système de refroidissement et de copeaux :
Système de refroidissement : HSD 400, huile pure 700 l / huile sale 1 000 l
Pompe haute pression : Pompe à pistons radiaux Moog – 7,5 kW – 2–194 l/min – 33 bar
Convoyeur de copeaux : bande magnétique Astos – 0,25 kW – 1 375 min⁻¹ – 450 mm de largeur utile – env. 75 kg/h
Unités supplémentaires :
Centrifugeuse à copeaux : Mayfran VBU 1000 – 1,5 kW – 500 l/min
Filtre gravitaire : Resy 803/710 – 30 μm – 350 l/min
Pompe submersible : Schmalenberger Z40-13/2-2.2 – 2,2 kW – 500 l/min
Refroidisseur d’air : Sesino AP830-EB – 108 000 kJ/h – 0,9 kW
Unité de puissance hydraulique : Mevesta – 0,37 kW – 7 l/min – 65 bar
Unité pneumatique : Bosch – 5–8 bar – finesse du filtre 40 μm
Metodo di foratura: Foratura a labbro (ELB)
Numero di mandrini: 4
Distanza tra i mandrini: 120 mm
Altezza punte dal pavimento: 1.150 mm
Corsa del carrello di perforazione: 1.450 mm
Profondità di foratura circa: 700 mm
Campo di foratura (in acciaio St60): Ø 4 – 30 mm (max. Ø 35 mm)
Ore di funzionamento: 43.220h
Dati elettrici:
Tensione di esercizio: 400 V AC
Frequenza: 50 Hz
Potenza totale allacciata: 50 kW
Corrente nominale: 100 A
Fusibile principale: 125 A
Controllo: Siemens S7-300 con pannello di controllo OP177
Unità di elaborazione:
Azionamento mandrino principale: Siemens 1PH7107-7QF02-0BKO – 9,0 kW – 1.500–9.000 giri/min"¹
Rapporto mandrino: 17K28/76 e 17K55/112
Velocità del mandrino: 1.000–6.100 min⁻¹
Azionamento di avanzamento (asse Z): vite a ricircolo di sfere Schneeberger / Siemens 40×10×1740 mm
Velocità di avanzamento: 10–15.000 mm/min
Corsa rapida: 15 000 mm/min
Motore di azionamento: Siemens 1FK7086-7AF71-1FH5 – 28 Nm – 3.000 giri/min"¹
Bloccaggio del pezzo:
Azionamento contropunta: SEW RF47DV132S2 – 5,5 kW – 250 min⁻¹
Pulegge per cinghie dentate: 60 T10/35 e 97 T10/35
Manicotto di pressione: Spieth DSM 30.1
Interruttore di prossimità: Balluff BES516-325-E5-Y-S4
Sistema di raffreddamento e trucioli:
Sistema di raffreddamento: HSD 400, olio puro 700 l / olio sporco 1 000 l
Pompa ad alta pressione: Pompa a pistoni radiali Moog – 7,5 kW – 2–194 l/min – 33 bar
Trasportatore trucioli: Nastro magnetico Astos – 0,25 kW – 1 375 min⁻¹ – 450 mm di larghezza utile – circa 75 kg/h
Unità aggiuntive:
Centrifuga per trucioli: Mayfran VBU 1000 – 1,5 kW – 500 l/min
Filtro a gravità: Resy 803/710 – 30 μm – 350 l/min
Pompa sommersa: Schmalenberger Z40-13/2-2.2 – 2.2 kW – 500 l/min
Raffreddatore d'aria: Sesino AP830-EB – 108.000 kJ/h – 0,9 kW
Centralina idraulica: Mevesta – 0,37 kW – 7 l/min – 65 bar
Unità pneumatica: Bosch – 5–8 bar – finezza del filtro 40 μm
Boormethode: Lipboren (ELB)
Aantal spindels: 4
Afstand tussen de spindels: 120 mm
Harthoogte boven de vloer: 1.150 mm
Slag boorwagen: 1.450 mm
Boordiepte ca.: 700 mm
Boorbereik (in staal St60): Ø 4 – 30 mm (max. Ø 35 mm)
Draaiuren: 43.220h
Elektrische gegevens:
Bedrijfsspanning: 400 V AC
Frequentie: 50 Hz
Totaal aansluitvermogen: 50 kW
Nominale stroom: 100 A
Hoofdzekering: 125 A
Besturing: Siemens S7-300 met OP177
bedieningspaneel
Verwerkingseenheid:
Hoofdspilaandrijving: Siemens 1PH7107-7QF02-0BKO – 9,0 kW – 1.500–9.000 tpm⁻¹
Spindelverhouding: 17K28/76 en 17K55/112
Spindelsnelheid: 1.000–6.100 min⁻¹
Voedingsaandrijving (Z-as): Schneeberger / Siemens kogelomloopspindel 40×10×1740 mm
Aanvoersnelheid: 10–15.000 mm/min
Snelle verplaatsing: 15 000 mm/min
Aandrijfmotor: Siemens 1FK7086-7AF71-1FH5 – 28 Nm – 3 000 tpm⁻¹
Werkstuk opspanning:
Aandrijving losse kop: SEW RF47DV132S2 – 5,5 kW – 250 min⁻¹
Distributieriemschijven: 60 T10/35 en 97 T10/35
Druk mouw: Spieth DSM 30.1
Naderingsschakelaar: Balluff BES516-325-E5-Y-S4
Koelvloeistof- en spanensysteem:
Koelsmeermiddelsysteem: HSD 400, zuivere olie 700 l / vuile olie 1 000 l
Hogedrukpomp: Moog radiale zuigerpomp – 7,5 kW – 2–194 l/min – 33 bar
Spaantransporteur: Astos magneetband – 0,25 kW – 1 375 min⁻¹ – 450 mm bruikbare breedte – ca. 75 kg/h
Extra eenheden:
Spaancentrifuge: Mayfran VBU 1000 – 1,5 kW – 500 l/min
Zwaartekrachtfilter: Resy 803/710 – 30 μm – 350 l/min
Dompelpomp: Schmalenberger Z40-13/2-2.2 – 2.2 kW – 500 l/min
Luchtkoeler: Sesino AP830-EB – 108.000 kJ/h – 0,9 kW
Hydraulisch aggregaat: Mevesta – 0,37 kW – 7 l/min – 65 bar
Pneumatische eenheid: Bosch – 5–8 bar – filterfijnheid 40 μm